
Till the finest finished product.
TMT Steel Bars
- TMT steel bars are produced using the TEMPCORE technology that provides the bar with a strong outer core of tempered martensitic steel with a softer inner core of ferrite-pearlite.
- Our TMT bars are rolled in a fully automated rolling mill featuring pre-stressed strands. Pre-stressed strands ensure a bar to maintain roundness and weight throughout it’s length.
- Precise longitudinal and inclined transverse ribs ensures our bar has a stronger hold with concrete.
- Our steel bars hold an IS: 1786 Indian Standards Certificate.
What Are TMT Bars?
TMT bars (Thermo-Mechanically Treated bars) are ribbed steel reinforcement bars used inside concrete in houses, apartments, bridges and industrial buildings. Concrete is strong when pressed but weak when pulled; the TMT bar carries that pulling (tensile) load. A good TMT bar has a hard outer layer for strength and a softer core that lets it bend without breaking, which matters most in earthquakes.
How Agni TMT Steel Bars Are Made
- Iron ore to steel: Agni makes its own sponge iron (DRI) from iron ore and melts it into steel in induction furnaces at Ingur, Erode.
- Billets: the steel is cast into billets in-house, so the chemistry of every bar is controlled from the start.
- Rolling: billets are reheated and rolled into ribbed bars in a fully automated rolling mill.
- Quenching and self-tempering: right after the last stand, the bar passes through a water-cooling system. The surface hardens into tempered martensite while the hot core stays ferrite-pearlite, then tempers the surface as it cools.
TMT Bar Grades Under IS 1786
The number in the grade is the minimum yield strength in N/mm². “D” grades have higher elongation, so they bend more before breaking.
| Grade | Min. yield strength (N/mm²) | Min. elongation | Typical use |
|---|---|---|---|
| Fe 415 / Fe 415D | 415 | 14.5% / 18% | Small, low-rise buildings |
| Fe 500 / Fe 500D | 500 | 12% / 16% | Houses and apartments |
| Fe 550 / Fe 550D | 550 | 10% / 14.5% | Multi-storey, commercial and heavy-load work |
| Fe 600 | 600 | 10% | Special heavy infrastructure |
Agni TMT Bars: Grades and Sizes
- Fe 550D: high strength with good ductility, for houses, apartments and commercial buildings.
- Fe 550D CRS: corrosion-resistant steel for coastal areas and damp sites.
- Fe 550D EQRS: earthquake-resistant steel with higher elongation.
- Sizes: 6 mm to 32 mm.
Full mechanical and chemical values are on the Fe 550D grade page. For today’s rate, see the TMT steel price page; to buy, find a dealer near you.
Where TMT Steel Bars Are Used
- Foundations, columns, beams and slabs in houses and apartments
- Commercial buildings and warehouses
- Bridges, flyovers and roads
- Water tanks, dams and industrial plants
How to Check TMT Bar Quality Before You Buy
- Look for the ISI mark and the BIS licence number (CM/L) rolled on the bar, and check the licence on the BIS website.
- Ask for the mill test certificate for your batch: it shows yield strength, tensile strength and elongation.
- Check the bar’s weight per metre against the standard weight for its size.
- Ribs should be clear and even along the whole length.
TMT Bars: Common Questions
What is the full form of TMT?
TMT stands for Thermo-Mechanically Treated: the bar is shaped by rolling (mechanical) and then strengthened by controlled cooling (thermal).
What is the difference between TMT bars and ordinary steel bars?
Ordinary mild steel or cold-twisted (TOR) bars get their strength from twisting, which makes them less ductile and more prone to rust at the twisted surface. TMT bars get their strength from quenching, so they combine high strength with better bendability and weldability.
Which TMT grade is best for a house?
Fe 500D or Fe 550D suits most houses. Fe 550D gives extra strength for multi-storey buildings; your structural engineer should confirm the grade and sizes for your design.
Is a TMT bar iron or steel?
It is steel: iron with a small, controlled amount of carbon and other elements. People often call it an “iron rod” or “kambi”, but the material is steel.